Every princess needs an organza tutu. I made this one using a sequined headband from the dollar store. Following instructions from YouTube videos I cut strips of blue organza in 6" x 18" and 6" x 17" wide strips. I threaded the end of the strip through a space in the headband and out the front side, repeating the process for the other end 2-3 gaps over. The strips are added about an inch apart. There are two rows. If you choose to use tulle, you will probably want 3 rows to get the same fullness. I finished the waistband with a strip of satin ribbon attached the same way as the strips and tied into a bow. This went together really fast. I had it done in an evening. This tutu was a gift for a friend's daughter's first birthday. The picture was so cute - a big puff of organza with a darling blue-eyed toddler peeking out.
Sunday, August 10, 2014
Sunday, July 20, 2014
Lorelei's Fairy House from Upcycled Tin
I intended to cut this hexangonal Sutter Home wine tin into pieces for jewelry but Lorelei has been desparate to make a fairy house. I started by cutting doors and windows with tin snips. I had Lorelei do a little smoothing with a metal file. Ultimately, it was easier to apply an edge of metal tape around the openings to protect delicate fairy wings. We used a game board for the base. Lorelei added skeleton leaves to the roofline and I had a nest in my floral stash that we added for the roof. I cut a small gourd and made an awning for a little house without a knowing where we were going with it. Lorelei came up with the idea to make it a ladybug house and it turned out really cute. All the bark, pebbles and moss were glued into place. We gathered bark outdoors. I bought a mixed bag of moss at Michael's. I added pieces of grapevine to make the arch over the house and twisted in some beaded wire. The door is attached with ribbon. Inside is a table made from a leaf with twigs for legs.
I have a flex shaft to drill small holes. Working with tin, it is easier if you start the hole by marking it with a spring loaded punch.
Posted by Desert Artacyn, Compulsive Crafter, Impulsive Writer on Sunday, July 20, 2014
Tuesday, August 17, 2010
Be careful when adding the fabric and any trim. Keep the joint pliable. By joint, I meet the gutter formed where the front cover meets the binding spine flap. When applying the duct tape leave about a 1/4" gap between the boards so that the cover bends open easily. Then don't muck it up ( a technical term) by layering tacky tape and glue and trim down the joint so thick that you lose bendability. I finished off the two holes for the ribbon with decorative eyelets. Note: The ribbon is not the sole binding cord. The cord is different. I'll talk about the binding in a later post.
This second picture illustrates two sizes of sheet protectors. The smaller sleeve displays a corsage that had been dried between the pages of the original scrapbook. Amazing that it was still in tact after 60 years. Hopefully it will last another 60, now that it is protected.
Remember, I told you that I combined the photos from an accompanying photo album into the pages of the scrapbook. My goal was to maintain the integrity of the original scrapbook design which contained all the spontaneity and randomness of a teenager. I was not concerned with "decorating " or embellishing the original designer's work.
Posted by Desert Artacyn, Compulsive Crafter, Impulsive Writer on Tuesday, August 17, 2010
Saturday, August 14, 2010
Years of loving, yet neglectful acts of unkindness and this is the condition of a beloved 1947 scrapbook holding the high school years of a homecoming queen. Everyone loved to look at it, turning each brittle page and marveling at the items glued, taped and even pinned in place. The book has been displayed at scrapbooking classes and carted across country. It even survived a bad car accident when a 93-year-old man plowed through the bedroom wall and into the antique dry sink where all the scrapbooks were stored. (BTW, he was fine - amazing, considering it was his second or, I forget, third? accident in the last three weeks)
The whole book could have been wrapped in tissue and boxed away only to be brought out on special occasions and handled with gloved hands like a museum piece but I wanted everyone to continue to enjoy it up close and personal. That's what I love about sheet protectors. They do their job. Spill protection. No accidental rips. You won't lose anything that might come loose. They make the pages touchable. And that's what I hate about sheet protectors--loss of tactile sensation. You can't touch what's inside. You can't turn the pages of a card or pamphlet glued to the page. Small sacrifice in exchange for years of added life.
In addition to this scrapbook was a photo album, in not much better shape, filled with black and white photos of the same high schools classmates referenced in the scrapbook. I wrestled with whether to preserve both separately or to combine them. Combining won in the end. I loved the results because the people pictures added faces to names listed in the newpaper articles and programs.
Where to start? I took the scrapbook apart, saving the extra blank pages at the back as well as the broken pieces of binding. Next, I counted out the number of protective sleeves I needed. Most of the pages had items pasted on the front and the back so 1 page protector per sheet. A few pages could be backed by a separate sheet. Here is where the extra blank pages came in handy - glad I didn't toss those.
I use Prestige Archival Protective Sleeves, acid free, polypropylene sleeves, 11" x 17". Notice though the overall dimensions of the book--12 1/2" x 16 1/2". I knew I would have to cut the top edge off. I say top edge because they are top loading, that's the open edge. In addition to the 11" x 17" sheet protectors I ordered some 8 1/2" x 11" for some smaller things I found in the scrapbook like a gossipy little handwritten note and a term paper with an "Excellent" score in red. I ordered the Prestige Protective Sleeves from http://www.cutting-mats.net/archival-pages.html. Their pricing and service is great.
Next post I'll talk about what I did to the pages while waiting for the sheet protectors to arrive.
Posted by Desert Artacyn, Compulsive Crafter, Impulsive Writer on Saturday, August 14, 2010